你知道濟南樓承板在使用中常見的問題有哪些嗎?這對于一個新手，下面的內容是非常有用的，接下來小編會給大家簡單的分析一下！

Do you know the common problems in the use of Jinan floor bearing plate? For a novice, the following content is very useful. Next, I will give you a simple analysis!

一、樓承板是什么，選用的材質是什么?

1、 What is the floor bearing plate and the material used?

樓承板是用在多高層建筑中替代原始模板運用。樓承板的材質也即是指鍍鋅含有量和屈從強度，常見的樓承板有Q235和Q345和G410。

The floor bearing plate is used to replace the original formwork in high-rise buildings. The material of floor bearing plate refers to the content of zinc plating and the yield strength. Common floor bearing plates include Q235, Q345 and G410.

二、樓承板較土建相比有哪些優勢?

2、 What are the advantages of floor bearing plate compared with civil engineering?

樓承板和土建相比重點優勢是施工快、省工時、省混土壤、功效好、不需求愛護、它直接用作永恒性模板運用，且持久耐用。(因為樓承板不妨多層施工)防炎功能強等。

Compared with civil engineering, the key advantages of floor bearing plate are fast construction, labor saving, soil mixing saving, good efficiency, no need for care, direct use as permanent formwork, and durability. (Because the floor bearing plate can be constructed in multiple layers) with strong anti-inflammation function.

三、樓承板的重點特點是什么?

3、 What are the key features of floor bearing plate?

分量輕、強度高、承重大、抗震性好、施工簡單快捷、拼裝簡便、替代傳統模板、改良傳統模板缺點、可作為結構強度一部分、減低原料本錢、易于配筋、配線、配管之施工、外表整潔雅觀。

Light weight, high strength, large bearing capacity, good seismic resistance, simple and fast construction, simple assembly, replacement of traditional formwork, improvement of traditional formwork defects, can be used as a part of structural strength, reduce raw material cost, easy reinforcement, wiring, piping construction, clean and elegant appearance.

四、樓承板不配筋不妨嗎?

4、 How about floor bearing plate without reinforcement?

都需求配筋的，只是量大量少的問題，不妨研究鋼筋桁架樓承板，對照省事，而且不妨設計跨度較在的無維持板跨，減少或許基本不用臨時維持。

There is only a large amount of reinforcement required. It is better to study the steel bar truss floor support plate and compare it to save time. It is also better to design the non-sustainable slab span with a larger span, which may be reduced without temporary maintenance.

五、樓承板的品種?

5、 What kind of floor bearing plate?

樓承板分為開口式、閉口式和鋼筋桁架板。

The floor support plate is divided into open type, closed type and reinforced truss plate.

六、什么是樓承板的波高?什么是樓承板的波距?

6、 What is the wave height of the floor bearing plate? What is the wave distance of the floor bearing plate?

YX73-140-760型樓承板基本參數波高：73mm波距：140mm有用寬度：760mm張開寬度：1000mm(厚度規格：0.8mm,1.0mm,1.2mm)

YX73-140-760 floor bearing plate basic parameters wave height: 73mm wave distance: 140mm useful width: 760mm opening width: 1000mm (thickness specification: 0.8mm, 1.0mm, 1.2mm)

七、樓承板的厚度?

7、 Thickness of floor bearing plate?

慣例厚度為0.8mm-1.2mm。鋼筋桁架樓承板的底板厚度通常是0.5mm。

The conventional thickness is 0.8mm-1.2mm. The thickness of the bottom plate of the reinforced truss floor support plate is usually 0.5mm.

樓承板可以作為現澆混凝土的模板。這樣就省掉了施工中安裝和拆除模板等工序，從而節省了時間和勞動力。您有需求就來我們網站http://m.jywhzx.com咨詢吧！

The floor bearing plate can be used as the formwork of cast-in-place concrete. In this way, the installation and removal of formwork and other processes during construction are eliminated, thus saving time and labor. Come to our website if you need http://m.jywhzx.com Ask!