泡沫復合板在包裝行業的使用可以起到緩沖壓力的作用，在建筑中使用，可以起到隔熱或保溫的作用。小編認為泡沫復合板的安裝是非常重要的，接下來我們就說說這個問題。

The use of foam composite board in the packaging industry can buffer the pressure, and it can play the role of heat insulation or heat preservation in buildings. Xiaobian believes that the installation of foam composite board is very important. Next, let's talk about this problem.

安裝泡沫復合板的外墻應保持清潔，在安裝泡沫復合板的時候不能觸摸泥土或灰塵。如果是草根墻的話，那么應確保墻面的平整、堅固，同時應垂直。 如果是在夏季進行泡沫復合板施工的話，應采取防曬措施，避免陽光直射。

The outer wall of the foam composite board shall be kept clean, and the soil or dust shall not be touched when installing the foam composite board. If it is a grass-roots wall, it should ensure that the wall is flat, solid and vertical. If the construction of foam composite board is carried out in summer, sunscreen measures should be taken to avoid direct sunlight.

冬季施工的話，注意施工的溫度不應低于零度。在雨季，我們應采取防水措施，嚴禁在雨中施工。 原材料使用的泡沫復合板應進行測試并重新檢查其性能。

For winter construction, pay attention that the construction temperature should not be lower than zero. In rainy season, we should take waterproof measures and prohibit construction in the rain. The foam composite board used as raw material shall be tested and its performance shall be rechecked.

泡沫復合板的使用，不僅可以隔熱，而且還可以隔音。所以泡沫復合板還是一種很好的吸聲材料，也因為這樣特性而被人們廣泛的使用，主要是為了降低噪音。因為泡沫復合板的安裝對它的使用效果影響是很大的，所以在安裝的時候要注意。

The use of foam composite board can not only heat insulation, but also sound insulation. Therefore, foam composite board is also a good sound-absorbing material, which is widely used by people because of its characteristics, mainly to reduce noise. Because the installation of foam composite board has a great impact on its use effect, we should pay attention to it when installing.

泡沫復合板一般與墻體的粘結面積應大于35%，首層粘結面積須要大于50%。每平米基本上需要4-6個鉚釘。

Generally, the bonding area between the foam composite board and the wall should be greater than 35%, and the bonding area of the first layer should be greater than 50%. Basically, 4-6 rivets are needed per square meter.

其次濟南泡沫復合板與前提粘結完成后需要停留一天，然后才能開始保護層的施工。保護層完工后需要再次間隔一天時間之后，才可以開始外飾面的施工。泡沫復合板一定要達到設計要求的厚度才能做到節能要求。

Secondly, Jinan foam composite board needs to stay for one day after bonding with the premise, and then the construction of the protective layer can be started. After the completion of the protective layer, the construction of the external finish can only be started after another one-day interval. The thickness of foam composite board must meet the design requirements in order to meet the energy-saving requirements.

事實上泡沫復合板對施工工藝上的要求遠遠不止這些。具體的細節還要按照廠家的施工工藝來做。這樣才能更好更有效果的順利使用，您可以關注我們網站http://m.jywhzx.com咨詢了解更多內容。

In fact, the requirements of foam composite board on construction technology are far more than these. The specific details should be done according to the construction process of the manufacturer. In this way, you can use it more effectively and smoothly. You can pay attention to our website http://m.jywhzx.com Consult for more information.